20/20 SPECIAL

Series Two Pomona Steering Wheel

$185.00 + shipping

• Series Two Steering Wheel
• Pomona Slotted Spoke Pattern
• Brushed Stainless Steel Frame
• Fathom Blue Split Front Grip Color A
• Sahara Tan Split Front Grip Color B – Soft Touch
• Sahara Tan Rear Grip – Soft Touch
• Chrome CON2R Horn Button

This wheel is “sold as is” in acceptable used condition. Item has obvious wear but is still operational. There are tears and holes in the Sahara Tan soft touch finish. The Fathom Blue upper handle section, stainless steel and chrome are still in very good condition. Mounting hardware, horn button, instructions and box are all brand new. See attached photos for detail of worst imperfections.

This steering wheel comes with our standard CON2R horn button.  If you would like a different horn button, please select from the options below.

In stock

  • HORN BUTTON:

    ETCHED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to etch your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 1¾” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be etched on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    LASERED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to laser your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 1¾” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be lasered on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    CUSTOM CRAFTED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to create your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 1¾” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be placed on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

  • DO YOU NEED A MOUNTING ADAPTER?

    IMPORTANT NOTE:  It is critical that you follow the manufacturer’s instructions as to how to install an adapter and how to mount a steering wheel to one of their columns.  If our bolt pattern does not match your adapter or column do not attempt to modify our wheel, the adapter or the column to try to make it fit.

    All of our steering wheels, with the exception of our C1 and C2 models with the direct factory mounting pattern, use what is commonly referred to as a “late GMC three-bolt mount.”  A drawing of this three-bolt mounting pattern can be found HERE.

    If your column does not have this mounting pattern you will need an adapter to be able to install your new CON2R wheel.

    You can find the adapter you need by clicking HERE.

    We stock the following adapters and can order others for you on request.

    Adapter Selection

RESET
SKU: 50545 - DSP Categories: , , ,

All About Our Series Two Steering Wheels

●  These wheels all feature stainless steel frames with a universal 3-bolt mounting pattern.

If there is anything else you want included in your wheel design, send an email to wheels@con2r.com describing what you envision and we’ll do our best to help you create it.

Related products