20/20 SPECIAL

Series One Gazelle Steering Wheel

$397.50 + shipping

• Gazelle Two Spoke Pattern
• 2” Offset
• “Double Y” Split Front Grip
• Hugger Orange Front Grip Color A
• Simply White Front Grip Color B
• Hugger Orange Rear Grip
• Die-Cast Chrome Spokes
• Trim 465
• CON2R Horn Button

This wheel is “sold as is” in like new condition. It is custom painted in 1969-71 Chevrolet Hugger Orange (WA3959). All injection molded ABS, chrome, custom paint, mounting hardware, horn button, instructions and box are all complete, intact & brand new. See attached photos.

This steering wheel comes with our standard CON2R horn button. If you would like a different horn button, please select from the options below.

In stock

  • HORN BUTTON:

    ETCHED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to etch your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be etched on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    RECESSED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to create your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be placed on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    HORN BUTTON WITH AN INLAID EMBLEM:

    Inlaid Emblem Guidelines

    •  The ideal size for an emblem is a 2½ - 2¾" diameter.

    •  There isn't a height restriction for an emblem, but the maximum depth for the recessed portion is 1/8”.

    •  A drawing of our horn button with dimensions can be found HERE.

    •  The cost of a custom inlay in a horn button can vary from $125-$200.  We will need a picture and/or a drawing with dimensions of your concept to be able to provide you with an accurate quote.

    Upload Photo:

    Use this window to send us a photo with dimensions or a drawing with dimensions of the emblem you want inlaid in your horn button.

    • (max file size 15 MB)

    If needed, please provide a description of your concept for your horn button:

    * These emblems are provided to us by third parties.  Prices are for the horn button with the emblem inlaid as shown.

  • DO YOU NEED A MOUNTING ADAPTER?

    IMPORTANT NOTE:  It is critical that you follow the manufacturer’s instructions as to how to install an adapter and how to mount a steering wheel to one of their columns.  If our bolt pattern does not match your adapter or column do not attempt to modify our wheel, the adapter or the column to try to make it fit.

    All of our steering wheels, with the exception of our C1 and C2 models with the direct factory mounting pattern, use what is commonly referred to as a “late GMC three-bolt mount.”  A drawing of this three-bolt mounting pattern can be found HERE.

    If your column does not have this mounting pattern you will need an adapter to be able to install your new CON2R wheel.

    You can find the adapter you need by clicking HERE.

    We stock the following adapters and can order others for you on request.

    Adapter Selection

    • 31.34 $
    • 31.34 $
    • 31.34 $
    • 31.34 $
    • 31.34 $
    • 38.6 $
    • 38.6 $
    • 38.6 $
    • 98 $
    • 158 $
RESET
SKU: HUGGER - DSP Categories: , , ,

All About Our Series One Steering Wheels

●   Our Series One Steering Wheels have a 15″ outside diameter, die-cast chrome trim, chrome plated steel frame, and a 3-bolt mounting pattern.

If there is anything else you want included in your wheel design, send an email to wheels@con2r.com describing what you envision and we’ll do our best to help you create it.

Related products