Series One/Banjo CON2R Horn Button

Series One / Banjo Custom Horn Buttons

Starting at $15.00

  • HORN BUTTON:

    HORN BUTTON:

    ETCHED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to etch your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be etched on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    LASERED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to laser your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be lasered on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    CUSTOM CRAFTED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to create your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2½” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be placed on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    RECESSED HORN BUTTON ART REQUIREMENTS:

    We require “camera ready” art to create your design.  You can load your file using the link below.  For best results, your artwork should be high contrast and in a vector (.eps, .ai, or .pdf) format, although we can use .jpg, .png, or .tif files as well.  The maximum image area is 2” in diameter.

    • (max file size 15 MB)

    If you do not have a design ready to be placed on your horn button, please provide a short description of your desired design or use the Select Your File button above to send us a sketch.  Please note, we cannot provide you with “trademarked” art.

    HORN BUTTON WITH AN INLAID EMBLEM:

    Inlaid Emblem Guidelines

    •  The ideal size for an emblem is a 2½ - 2¾" diameter.

    •  There isn't a height restriction for an emblem, but the maximum depth for the recessed portion is 1/8”.

    •  A drawing of our horn button with dimensions can be found HERE.

    •  The cost of a custom inlay in a horn button can vary from $125-$200.  We will need a picture and/or a drawing with dimensions of your concept to be able to provide you with an accurate quote.

    Upload Photo:

    Use this window to send us a photo with dimensions or a drawing with dimensions of the emblem you want inlaid in your horn button.

    • (max file size 15 MB)

    If needed, please provide a description of your concept for your horn button:

    * These emblems are provided to us by third parties.  Prices are for the horn button with the emblem inlaid as shown.

RESET
Categories: ,

Our Series One / Banjo Custom Horn Buttons are designed to fit only on a CON2R Series One or Banjo Steering Wheel.  We also offer a Series Two Custom Horn Button for our Series Two Steering Wheels.  Our C1 Corvette Steering Wheel is designed to use the factory hub and horn button from a C1 Corvette.

Related products